The Hodgkin-Huxley Model: Neurons as Electrical Circuits
This article provides a comprehensive overview of how the Hodgkin-Huxley model represents nerve action potentials using an equivalent electrical circuit. First introduced in 1952 by Alan Hodgkin and Andrew Huxley, this foundational biophysical model translates the complex biological processes of a firing neuron into quantifiable electrical components. By reading further, you will understand how the cell membrane acts as a capacitor, how ion channels function as variable resistors, and how electrochemical gradients serve as batteries to generate and propagate electrical signals in the nervous system.
The Parallel Circuit Components
At the core of the Hodgkin-Huxley model is the representation of a small patch of a neuron's cell membrane as an parallel electrical circuit. Each biological feature of the neuron corresponds directly to a standard electrical component:
- The Capacitor (\(C_m\)): The lipid bilayer of the cell membrane separates charged ions inside the cell (cytoplasm) from those outside (extracellular fluid). Because it acts as an insulating barrier that accumulates charge on either side, the membrane is modeled as a capacitor.
- The Resistors (Conductances, \(g\)): Embedded within the lipid bilayer are protein channels that allow specific ions to pass through. These channels resist the flow of ions to varying degrees. In the model, they are represented as resistors, though biophysicists prefer to use the inverse of resistance, known as conductance (\(g = 1/R\)). The model includes three main types of conductances: sodium (\(g_{Na}\)), potassium (\(g_K\)), and a general "leak" conductance (\(g_L\)) mainly for chloride and other passive ions.
- The Batteries (\(E\)): Ions naturally flow from areas of high concentration to low concentration. Because there is more sodium outside the neuron and more potassium inside, this chemical gradient creates potential energy. In the circuit, these concentration gradients are modeled as batteries (or electromotive forces) for each ion type: \(E_{Na}\), \(E_K\), and \(E_L\). The voltage of each battery is determined by the Nernst equation, which calculates the exact voltage needed to balance out the concentration gradient of a specific ion.
Variable Conductance and Gating Variables
If the ion channels were fixed resistors, the neuron would simply settle at a resting voltage and never fire an action potential. Hodgkin and Huxley discovered that the sodium and potassium channels are actually voltage-dependent. In the circuit diagram, these are drawn as variable resistors (rheostats) with arrows through them.
The leak conductance (\(g_L\)) remains constant, helping maintain the resting state. However, \(g_{Na}\) and \(g_K\) change dynamically based on the voltage across the membrane and time. To mathematically describe how these variable resistors open and close, the model uses three dimensionless "gating variables" that represent the probability of a channel being open:
- \(n\) particles: Control the activation (opening) of potassium channels.
- \(m\) particles: Control the fast activation (opening) of sodium channels.
- \(h\) particles: Control the inactivation (closing/blocking) of sodium channels.
As the membrane voltage changes, the values of \(n\), \(m\), and \(h\) shift between 0 and 1, thereby dialing the resistance of the sodium and potassium pathways up or down.
The Master Circuit Equation
Because the capacitor and the ionic pathways are arranged in parallel, the total electrical current (\(I\)) flowing across the membrane is the sum of the current charging the capacitor and the currents flowing through the three ionic resistors.
According to Ohm's Law, the current through any resistor is equal to its conductance multiplied by the voltage driving it. In a neuron, this "driving force" is the difference between the current membrane voltage (\(V_m\)) and the battery voltage for that specific ion (\(E_{ion}\)).
Therefore, the Hodgkin-Huxley circuit is governed by one master differential equation:
\[I = C_m \frac{dV_m}{dt} + g_{Na}(V_m - E_{Na}) + g_K(V_m - E_K) + g_L(V_m - E_L)\]
- \(C_m \frac{dV_m}{dt}\) is the capacitive current (how fast the membrane voltage is changing).
- \(g_{Na}(V_m - E_{Na})\) is the sodium current (\(I_{Na}\)).
- \(g_K(V_m - E_K)\) is the potassium current (\(I_K\)).
- \(g_L(V_m - E_L)\) is the leak current (\(I_L\)).
Simulating the Action Potential
By linking these components together, the circuit replicates the exact phases of a biological action potential:
- Resting State: The variable resistors for sodium and potassium are mostly closed (high resistance, low conductance). The membrane voltage sits near the leak and potassium battery potentials (around -70 mV).
- Depolarization (The Upstroke): An incoming electrical stimulus charges the capacitor (\(C_m\)), making the membrane voltage slightly more positive. This voltage change causes the sodium variable resistor to rapidly drop its resistance (\(m\) gates open). Current rushes through the sodium pathway, driven by the \(E_{Na}\) battery, pulling the overall circuit voltage toward +55 mV.
- Repolarization (The Downstroke): The high positive voltage triggers two delayed events in the circuit. First, the sodium resistor is blocked (\(h\) gates close), cutting off the sodium current. Second, the potassium variable resistor drops its resistance (\(n\) gates open). Now, the \(E_K\) battery dominates the circuit, driving the voltage back down toward -75 mV.
- Hyperpolarization (The Undershoot): Because the potassium variable resistor is slow to increase its resistance back to resting levels, the circuit voltage briefly dips more negative than the normal resting state, closely approaching the \(E_K\) battery limit.
- Return to Rest: The potassium resistor finally returns to its high-resistance state, the sodium resistor resets, and the circuit stabilizes back at its resting voltage, ready to fire again.