The First Law of Thermodynamics and Energy Conservation
This article explores how the first law of thermodynamics serves as the foundational statement of energy conservation within thermal physics. By examining the exact relationship between internal energy, heat transfer, and work, this guide breaks down the mathematical formulation of the law, defines its core components, and demonstrates how it governs closed and isolated systems through various thermodynamic processes.
The Core Principle
In classical mechanics, the law of conservation of energy states that the total mechanical energy (kinetic plus potential) of an isolated system remains constant. Thermal physics expands this concept to include microscopic forms of energy.
The first law of thermodynamics formulates energy conservation by stating that energy cannot be created or destroyed; it can only change forms. In a thermal system, any change in the internal energy of the system must be accounted for by the heat added to the system and the work done by or on the system.
The Mathematical Formulation
To put energy conservation into a usable framework, the first law is expressed mathematically as:
ΔU = Q - W
(Note: In chemistry and some physics texts, it is written as ΔU = Q + W, depending on whether work is defined as being done by the system or on the system. Here, we use the standard physics convention where W is work done by the system).
Each variable represents a specific aspect of energy within the system:
- Internal Energy (ΔU): This is the total microscopic kinetic and potential energy of the atoms and molecules within the system. It is a "state function," meaning its value depends only on the current state of the system (pressure, volume, temperature), not on how the system arrived at that state.
- Heat (Q): This represents the energy transferred between the system and its surroundings purely due to a temperature difference. If heat flows into the system, Q is positive. If heat flows out, Q is negative.
- Work (W): This represents the energy transferred via macroscopic forces, most commonly a gas expanding or compressing against a piston. If the system expands and does work on its surroundings, W is positive. If the surroundings compress the system, W is negative.
Unlike internal energy, both heat (Q) and work (W) are "path functions." They do not describe a state of the system, but rather the process by which energy enters or leaves it. The first law proves that while Q and W depend on the path taken, their difference (Q - W) is always independent of the path.
Energy Conservation in Specific Processes
The formulation of the first law becomes clearest when applied to four standard thermodynamic processes for an ideal gas:
1. Isochoric Process (Constant Volume) If a gas is heated in a rigid, sealed container, its volume cannot change. Because no expansion occurs, no work is done (W = 0). The first law simplifies to ΔU = Q. All heat energy added to the system goes directly into increasing its internal energy (raising its temperature).
2. Isothermal Process (Constant Temperature) The internal energy of an ideal gas depends strictly on its temperature. If the temperature is held constant, the change in internal energy is zero (ΔU = 0). The equation becomes Q = W. To keep the temperature constant while a gas expands and does work, an equal amount of heat must be continuously added to the system.
3. Adiabatic Process (No Heat Transfer) If a system is thermally insulated from its surroundings, no heat can enter or leave (Q = 0). The first law becomes ΔU = -W. If the gas expands and does work on its surroundings, that energy must come entirely from its own internal energy, causing the gas to cool down.
4. Isolated Systems An isolated system cannot exchange heat or work with its surroundings (Q = 0 and W = 0). Therefore, ΔU = 0. The internal energy of an isolated system remains permanently constant, regardless of any chaotic processes happening inside it. Since the universe itself is the ultimate isolated system, the first law dictates that the total energy of the universe is constant.
The Impossibility of Perpetual Motion
By strictly accounting for all energy transfers, the first law of thermodynamics definitively rules out "perpetual motion machines of the first kind"—hypothetical machines that produce work indefinitely without an energy input.
For a machine to operate in a repeating cycle, its internal energy must return to its starting value at the end of each cycle (ΔU = 0). According to the first law, this means W = Q. A cyclical machine can never output more work (W) than the heat energy (Q) supplied to it. Energy conservation is absolute.