Snell's Law in Seismic Refraction Across the Moho

This article explores the fundamental application of Snell's law to seismic ray refraction across the Mohorovičić discontinuity, commonly known as the Moho. It explains the physics of seismic wave velocity changes between the Earth's crust and the underlying mantle, details how seismic rays bend when intersecting this compositional boundary, and illustrates how critically refracted waves allow geophysicists to measure crustal thickness and understand the internal structure of the Earth.

The Mechanics of Snell's Law in Seismology

Originally formulated to describe the behavior of light, Snell's law governs how any wave bends, or refracts, when it passes from one medium into another with a different propagation velocity. In solid-earth geophysics, this principle applies directly to seismic waves generated by earthquakes or controlled explosions.

Snell's law is expressed mathematically as:

sin(θ₁) / V₁ = sin(θ₂) / V₂

In this equation:

  • θ₁ is the angle of incidence (the angle between the incoming seismic ray and a line perpendicular to the boundary, known as the normal).
  • θ₂ is the angle of refraction (the angle between the outgoing ray and the normal).
  • V₁ is the seismic velocity of the upper medium.
  • V₂ is the seismic velocity of the lower medium.

The ratio of the sine of the angle to the velocity remains constant along a given seismic ray path, a value geophysicists refer to as the "ray parameter." When a seismic wave encounters a boundary where the velocity increases (V₂ > V₁), the wave must bend away from the normal (θ₂ > θ₁) to maintain this constant ratio.

The Mohorovičić Discontinuity

The Mohorovičić discontinuity, or Moho, is the boundary that separates the Earth's crust from the underlying mantle. Discovered in 1909 by Croatian seismologist Andrija Mohorovičić, this boundary represents a distinct shift in rock composition and density.

Above the Moho, the crust is composed primarily of lighter felsic and mafic rocks, such as granite and gabbro. Below the Moho, the mantle consists of denser ultramafic rocks, primarily peridotite. Because seismic wave velocity is controlled by the physical properties of the rock—specifically its bulk modulus, shear modulus, and density—this compositional change causes a sharp jump in seismic velocity.

Primary waves (P-waves) typically travel through the lower continental crust at velocities (V₁) between 6.0 and 7.0 km/s. Upon crossing the Moho into the rigid upper mantle, P-wave velocities (V₂) abruptly jump to approximately 8.0 to 8.2 km/s.

Ray Bending and Critical Refraction at the Moho

As seismic waves radiate outward and downward from a near-surface source, they strike the Moho at various angles of incidence (θ₁), depending on the distance from the source.

  1. Subcritical Incidence: At short distances from the seismic source, the ray strikes the Moho at a steep angle (small θ₁). Because the mantle velocity (V₂) is significantly higher than the crustal velocity (V₁), Snell's law dictates that the transmitted ray bends sharply away from the normal, entering the mantle at a wider angle (θ₂).
  2. Critical Incidence: As the distance from the source increases, the angle of incidence (θ₁) increases until it reaches a specific threshold known as the critical angle (θc). At this exact angle, Snell's law calculates the angle of refraction (θ₂) to be 90 degrees. Instead of penetrating deeper into the mantle, the refracted seismic ray travels horizontally, directly along the base of the Moho interface, at the higher mantle velocity of ~8.0 km/s.
  3. Postcritical Incidence: Rays striking the Moho at angles greater than the critical angle cannot refract into the mantle; instead, they undergo total internal reflection, bouncing back up into the crust.

Assuming an average crustal velocity (V₁) of 6.5 km/s and a mantle velocity (V₂) of 8.0 km/s, the critical angle is calculated as:

sin(θc) = 6.5 / 8.0 = 0.8125 θc ≈ 54.3 degrees

Head Waves and Geophysical Mapping

The phenomenon of critical refraction at the Moho is the cornerstone of seismic refraction surveying. As the critically refracted wave travels horizontally along the top of the mantle at 8.0 km/s, it continuously disturbs the base of the crust. By Huygens' principle, this disturbance generates new seismic waves that travel back up through the crust to the surface, exiting at the exact same critical angle (θc) at which they entered.

These returning waves are called "head waves" or Pn waves. Geophysicists contrast Pn waves with Pg waves, which are direct waves that travel strictly horizontally through the upper crust from the source to the receiver.

Near the seismic source, the direct Pg wave arrives at seismographs first because it travels a much shorter path. However, because the Pn wave travels a significant portion of its journey at the much faster mantle velocity (8.0 km/s versus 6.5 km/s), it eventually overtakes the direct wave. Beyond a specific "crossover distance" (typically 100 to 150 kilometers from the source for continental crust), the critically refracted Pn wave is the first to arrive at surface seismic stations.

By plotting the arrival times of Pg and Pn waves against the distance from the seismic source on a travel-time curve, geophysicists use Snell's law geometry to directly calculate:

  • The velocity of the crust (from the slope of the Pg arrival line).
  • The velocity of the upper mantle (from the slope of the Pn arrival line).
  • The exact depth to the Moho (derived from the crossover distance and the calculated velocities).

Through this direct application of Snell's law, seismologists have mapped the Moho globally, revealing that it lies roughly 5 to 10 kilometers beneath the ocean floor, averages 35 kilometers beneath continents, and plunges to depths of up to 70 kilometers beneath major mountain ranges.