How the Cavendish Experiment Measured Gravity's Constant
In 1798, British scientist Henry Cavendish performed a groundbreaking experiment that successfully measured the force of gravity between masses in a laboratory. Using a highly sensitive device called a torsion balance, Cavendish detected the microscopic gravitational attraction between lead spheres. This article provides a clear breakdown of the apparatus, the mechanics of the measurement, and the mathematical principles that allowed this historic experiment to determine the universal gravitational constant (\(G\)) and, consequently, the mass of the Earth.
The Missing Piece in Newton’s Law
Over a century before Cavendish's work, Isaac Newton formulated the law of universal gravitation. The law states that the gravitational force (\(F\)) between two objects is proportional to the product of their masses (\(m_1\) and \(m_2\)) and inversely proportional to the square of the distance (\(r\)) between their centers:
\(F = \frac{G \cdot m_1 \cdot m_2}{r^2}\)
While this equation worked perfectly for predicting planetary orbits relative to one another, no one knew the actual value of the gravitational constant (\(G\)) or the exact mass of the Earth. Because gravity is an exceptionally weak force, measuring the gravitational pull between two everyday objects seemed impossible due to the overwhelming interference of Earth's own gravity, friction, and air currents.
The Torsion Balance Apparatus
To overcome these obstacles, Cavendish used a torsion balance, originally designed by geologist John Michell. The apparatus was designed to isolate horizontal gravitational forces from the vertical pull of the Earth.
The setup consisted of the following components:
- A suspended rod: A six-foot wooden rod was hung horizontally from a thin, stiff wire attached to its center.
- Small masses: Two small lead spheres, each two inches in diameter and weighing about 1.6 pounds, were attached to either end of the wooden rod.
- Large masses: Two massive lead spheres, each twelve inches in diameter and weighing 348 pounds, were suspended independently on a separate swivel frame. This allowed them to be positioned close to the smaller spheres.
- A protective enclosure: Because the slightest breeze or temperature change could ruin the measurement, the entire apparatus was sealed inside a sturdy wooden case, which was itself locked inside a closed room.
Step 1: Measuring the Gravitational Deflection
Cavendish stood outside the room and used telescopes aimed through small windows to observe the experiment. He used Vernier scales illuminated by narrow beams of light to read the exact position of the rod without introducing his own body heat or air disturbances into the room.
To begin, Cavendish moved the two large lead spheres near the two small spheres—placing one large sphere in front of one small sphere, and the other large sphere behind the opposite small sphere.
The gravitational attraction between the large and small masses pulled the ends of the wooden rod toward the large spheres. As the rod rotated, it twisted the suspending wire. The wire resisted this twisting motion (a force known as restoring torque). Eventually, the rod came to rest at a new angle where the gravitational pull of the lead balls perfectly balanced the twisting resistance of the wire. Cavendish recorded the exact distance the rod moved.
Step 2: Determining the Stiffness of the Wire
Knowing the distance the rod moved was not enough; Cavendish needed to know exactly how much force was required to twist the wire by that specific amount.
To find the wire's stiffness (its torsion coefficient), Cavendish pushed the large spheres away and allowed the wooden rod to swing freely back and forth like a horizontal pendulum. By measuring the exact time it took for the rod to complete one full oscillation (about 20 minutes), and knowing the mass and dimensions of the rod and small balls, he could mathematically calculate the exact stiffness of the wire.
Step 3: Calculating the Gravitational Constant
Once the stiffness of the wire was known, Cavendish could convert the tiny deflection angle of the rod into a precise unit of force. The gravitational force he measured between the lead balls was minuscule—roughly \(1.74 \times 10^{-7}\) Newtons, or about the weight of a single grain of sand.
With the experiment complete, every variable in Newton’s equation was now known except for \(G\):
- \(F\) (Force) was determined by the twist of the wire.
- \(m_1\) and \(m_2\) were the known masses of the small and large lead spheres.
- \(r\) was the measured distance between the centers of the large and small spheres.
By rearranging Newton's equation to solve for the unknown constant, the value of \(G\) is revealed:
\(G = \frac{F \cdot r^2}{m_1 \cdot m_2}\)
Historically, Cavendish did not actually write down a value for \(G\), as the equation was not formatted that way in the 18th century. Instead, he used his measurements to calculate the density of the Earth, which he found to be 5.448 times the density of water (within 1% of the modern accepted value). Later physicists simply plugged Cavendish's remarkably accurate data into the modern formula, yielding a gravitational constant of approximately \(6.74 \times 10^{-11} \text{ m}^3\text{kg}^{-1}\text{s}^{-2}\), which is barely different from the currently accepted value of \(6.674 \times 10^{-11} \text{ m}^3\text{kg}^{-1}\text{s}^{-2}\).