How Air Resistance Affects Terminal Velocity

This article explores the physics of terminal velocity and how it is governed by air resistance. It covers the opposing forces of gravity and aerodynamic drag, explains how a falling object reaches a constant maximum speed, and breaks down the specific physical factors—such as mass, surface area, and atmospheric density—that increase or decrease an object's terminal velocity during free fall.

The Forces at Play: Gravity vs. Air Resistance

When an object is dropped, it initially accelerates toward the Earth due to the force of gravity. In a vacuum, where there is no air, this object would continue to accelerate indefinitely at a rate of 9.8 meters per second squared.

However, in an atmosphere, the falling object must push through gas molecules. This collision with air molecules creates an upward friction force known as air resistance, or drag.

How Terminal Velocity is Reached

Air resistance is not constant; it depends directly on the speed of the falling object. Here is the step-by-step process of what happens as an object falls:

  1. Initial Drop: Velocity is zero, air resistance is zero, and downward acceleration is at its maximum.
  2. Acceleration Phase: As the object falls faster, it collides with more air molecules per second. Consequently, the upward force of air resistance increases. This reduces the rate of downward acceleration.
  3. Equilibrium (Terminal Velocity): Eventually, the object falls fast enough that the upward force of air resistance completely equals the downward force of gravity.

When these two forces balance out, the net force on the object becomes zero. According to Newton's First Law of Motion, an object with zero net force will not accelerate. The object stops speeding up and continues to fall at a steady, unchanging speed known as its terminal velocity.

What Changes an Object's Terminal Velocity?

Terminal velocity is not a fixed number for all objects, nor is it always fixed for a single object throughout its entire fall. According to the physics of air resistance, several factors dictate what happens to terminal velocity:

1. Cross-Sectional Surface Area

If an object increases its surface area perpendicular to the fall, its terminal velocity decreases. A larger surface area catches more air molecules, generating greater air resistance at lower speeds. For example, a skydiver falling belly-to-earth has a large surface area and a terminal velocity of about 120 mph (193 km/h). When they open a parachute, the surface area expands drastically, air resistance spikes, and the skydiver rapidly decelerates to a new, much lower terminal velocity of about 12 mph (19 km/h).

2. Shape and Aerodynamics

An object's shape determines how easily air flows around it (measured as the drag coefficient). If that same skydiver pulls their limbs in and dives head-first, they become more streamlined. Air resistance decreases, meaning they must fall much faster for drag to equal gravity. Their terminal velocity increases to roughly 180 mph (290 km/h) or more.

3. Mass

If two objects have the exact same size and shape, the heavier object will have a higher terminal velocity. A heavier object experiences a stronger downward pull of gravity. Therefore, it must reach a higher speed to generate enough upward air resistance to balance out its heavier weight. This is why a lead ball reaches a much higher terminal velocity than a hollow plastic ball of the exact same size.

4. Atmospheric Density

Terminal velocity changes depending on the density of the air the object is falling through. At very high altitudes, the air is thin, meaning there are fewer air molecules to create resistance. An object dropped from the stratosphere will reach a very high terminal velocity. As it falls lower into the atmosphere, the air becomes denser. This increases air resistance, which actually causes the falling object to slow down, continuously reducing its terminal velocity as it gets closer to the ground.