How a Michelson Interferometer Measures Tiny Displacements

This article explains how the Michelson interferometer, a fundamental instrument in experimental physics, measures microscopic displacements with extreme precision. By splitting a coherent beam of light into two separate paths and recombining them, the device creates an optical interference pattern based on the light's wavelength. Analyzing the shifts in this pattern allows physicists to calculate minuscule movements of an object down to fractions of a nanometer.

The Basic Optical Setup

To understand how the measurement works, it is necessary to look at the four main components of the interferometer:

  • Monochromatic Light Source: Usually a laser, which provides light of a single, known wavelength.
  • Beam Splitter: A half-silvered mirror placed at a 45-degree angle to the incoming light beam.
  • Fixed Mirror: A stationary mirror that acts as a constant reference point.
  • Movable Mirror: A mirror attached to the object or mechanism whose displacement is being measured.
  • Detector: A screen or optical sensor that captures the final light pattern.

The laser emits a beam of light that hits the beam splitter. Half of the light passes straight through to the movable mirror, while the other half reflects at a 90-degree angle toward the fixed mirror. Both beams hit their respective mirrors, bounce directly back to the beam splitter, and recombine into a single beam that travels into the detector.

Wave Interference and Fringe Patterns

Because both beams originate from the same laser, they share the exact same wavelength and start out in phase with one another. When they recombine at the beam splitter, they interact based on the total distance each beam traveled.

If the two paths are the exact same length, or if their lengths differ by a whole number of wavelengths, the crests of both light waves align. This is called constructive interference, and it produces a bright spot of light on the detector.

If the paths differ by a half-wavelength (or any odd multiple of half-wavelengths), the crest of one wave aligns with the trough of the other. This is called destructive interference, causing the waves to cancel each other out and produce a dark area on the detector. Because the light beam spreads out slightly, the detector shows a bullseye pattern of alternating bright and dark concentric rings, known as interference fringes.

Calculating Displacement with Wavelengths

The Michelson interferometer measures tiny movements by linking the physical displacement of the movable mirror to shifts in the interference fringes.

Because the light has to travel to the movable mirror and bounce back, moving the mirror by a distance \(d\) changes the total travel distance of that light beam by \(2d\).

  • If the mirror moves by one-quarter of a wavelength (\(\lambda/4\)), the light's total path changes by one-half of a wavelength (\(\lambda/2\)). This causes a bright fringe on the detector to turn completely dark.
  • If the mirror moves by one-half of a wavelength (\(\lambda/2\)), the light's total path changes by one full wavelength (\(\lambda\)). This causes the fringe pattern to shift through one complete cycle—going from bright, to dark, and back to bright again.

By simply counting how many bright fringes pass a specific point on the detector as the mirror moves, physicists can calculate the exact distance the mirror was displaced. The mathematical formula for this measurement is:

\[d = \frac{m \cdot \lambda}{2}\]

In this equation:

  • \(d\) is the physical displacement of the mirror.
  • \(m\) is the number of full fringe shifts counted on the detector.
  • \(\lambda\) is the known wavelength of the laser light.

Precision in Experimental Physics

The accuracy of a Michelson interferometer is limited only by the wavelength of the light used and the sensitivity of the detector. For example, a standard helium-neon laser has a wavelength of 632.8 nanometers. A shift of just one fringe corresponds to a mirror movement of 316.4 nanometers.

By using advanced electronic photodetectors capable of measuring tiny fractions of a single fringe shift, modern interferometers can easily measure displacements much smaller than the diameter of a single atom. This exact principle is used in high-precision applications ranging from calibrating mechanical equipment to detecting cosmic gravitational waves in facilities like LIGO.