Dry vs. Moist Adiabatic Lapse Rates in Atmospheric Physics
This article explains the fundamental thermodynamic reasons why rising parcels of dry air and saturated moist air cool at different rates in the atmosphere. While all rising air cools as it expands in lower atmospheric pressure, saturated moist air cools significantly slower than dry air. This difference is primarily driven by the phase change of water—specifically, the release of latent heat during condensation, which internally warms the moist air parcel and partially offsets the cooling caused by expansion.
The Mechanics of Adiabatic Cooling
To understand the difference between the two lapse rates, it is first necessary to understand an adiabatic process. In atmospheric physics, an adiabatic process occurs when an air parcel rises or sinks without exchanging heat with its surrounding environment.
As an air parcel rises through the atmosphere, it encounters lower atmospheric pressure. This decrease in external pressure allows the air parcel to expand. To expand, the air molecules must push outward against the surrounding air, which requires doing thermodynamic work. Because no heat is entering the parcel from the outside, the energy required to do this work must come from the parcel's own internal energy. As internal energy decreases, the temperature of the air parcel drops.
The Dry Adiabatic Lapse Rate (DALR)
In meteorology, "dry air" refers to both completely moisture-free air and air that contains water vapor but is not yet saturated (relative humidity is below 100%).
When an unsaturated air parcel rises, it cools purely due to adiabatic expansion. Because no phase changes of water are occurring within the parcel, the rate of cooling remains constant. This is known as the Dry Adiabatic Lapse Rate (DALR), which is determined by the force of gravity and the specific heat capacity of dry air. Because both of these values are constant, the DALR is a fixed rate of approximately 9.8°C per kilometer (5.4°F per 1,000 feet).
The Moist Adiabatic Lapse Rate (MALR)
A saturated moist air parcel is at 100% relative humidity, meaning it is holding the maximum amount of water vapor possible for its current temperature and pressure.
Cold air cannot hold as much water vapor as warm air. Therefore, as a saturated air parcel rises and cools through expansion, it immediately loses its capacity to hold all of its moisture as a gas. The excess water vapor is forced to condense into liquid water droplets, forming clouds.
The Role of Latent Heat
The condensation of water vapor is the core reason the moist adiabatic lapse rate differs from the dry adiabatic lapse rate.
When water evaporates from a liquid to a gas, it absorbs energy from its environment (latent heat of vaporization). Conversely, when water vapor condenses back into a liquid, that exact same amount of stored energy is released back into the environment as sensible heat.
As a saturated parcel rises, two opposing processes happen simultaneously:
- Adiabatic expansion cools the air parcel.
- Condensation releases latent heat, warming the air parcel from the inside.
Because the released latent heat counteracts a portion of the cooling caused by expansion, the saturated air parcel cools at a much slower rate than a dry air parcel. This reduced rate of cooling is the Moist Adiabatic Lapse Rate (MALR), which averages around 5°C to 6°C per kilometer (roughly 3°F per 1,000 feet) in the lower troposphere.
Why the Moist Lapse Rate Varies
Unlike the constant DALR, the MALR is variable and changes depending on the temperature of the saturated air parcel. This variability is governed by the Clausius-Clapeyron relation, which dictates that warm air can hold exponentially more water vapor than cold air.
- Warm Saturated Air: In the warm tropics, a saturated air parcel holds a massive amount of water vapor. As it rises and cools, heavy condensation occurs, releasing a large amount of latent heat. This strongly offsets the expansion cooling, resulting in a very slow lapse rate of about 4°C per kilometer.
- Cold Saturated Air: At high altitudes or in polar regions, the air is extremely cold and can hold very little water vapor, even at 100% relative humidity. As this parcel rises, very little water is available to condense. With minimal latent heat released, the cooling rate of the saturated parcel closely approaches the dry adiabatic lapse rate of 9.8°C per kilometer.