Ballistic Pendulum: Momentum and Energy Conservation

This article explains how the ballistic pendulum experiment combines the conservation of linear momentum and the conservation of mechanical energy to measure the velocity of a high-speed projectile. By dividing the physical event into two distinct phases—a completely inelastic collision followed by an upward pendulum swing—physicists can calculate the initial speed of a fast-moving object using only basic measurements of mass and height.

The Mechanics of the Ballistic Pendulum

A ballistic pendulum consists of a heavy block of wood or metal suspended freely by cords. A projectile, such as a bullet or a steel ball, is fired horizontally into the stationary block. The projectile embeds itself inside the block, causing the combined mass to swing upward to a measurable height.

Because kinetic energy is lost as heat, sound, and wood deformation during the impact, you cannot simply equate the projectile's initial kinetic energy to the pendulum's final potential energy. Instead, the problem must be solved in two consecutive steps.

Phase 1: The Collision and Momentum Conservation

The first phase occurs the instant the projectile strikes and embeds itself into the stationary block. This happens so quickly that the pendulum does not have time to swing upward during the impact.

Because there are no significant external horizontal forces acting on the system during this brief moment, total linear momentum is conserved. However, because the two objects stick together, this is a completely inelastic collision, meaning kinetic energy is not conserved.

The conservation of momentum is expressed as:

  • Initial Momentum = Final Momentum
  • \(m \cdot v_i = (m + M) \cdot V\)

Where:

  • \(m\) is the mass of the projectile.
  • \(v_i\) is the initial velocity of the projectile.
  • \(M\) is the mass of the pendulum block.
  • \(V\) is the velocity of the combined block and projectile immediately after the collision.

Phase 2: The Swing and Energy Conservation

The second phase begins immediately after the projectile comes to rest inside the block. The combined mass now has a horizontal velocity (\(V\)) and begins to swing upward on its suspension cords.

During this swing, external forces (gravity and tension) act on the system, meaning linear momentum is no longer conserved. However, because gravity is a conservative force and the tension in the cords does no work (it acts perpendicular to the motion), mechanical energy is conserved.

As the pendulum swings upward, its kinetic energy is completely converted into gravitational potential energy at the peak of its arc.

The conservation of mechanical energy is expressed as:

  • Initial Kinetic Energy = Final Potential Energy
  • \(\frac{1}{2}(m + M)V^2 = (m + M)gh\)

Where:

  • \(g\) is the acceleration due to gravity.
  • \(h\) is the vertical height the pendulum rises.

By canceling the combined mass \((m + M)\) from both sides of the equation, we can solve for the velocity (\(V\)) of the pendulum right after the collision:

  • \(V = \sqrt{2gh}\)

Combining the Equations

To find the original velocity of the projectile (\(v_i\)), we bridge the two phases by substituting the velocity (\(V\)) found via energy conservation into the momentum conservation equation from the first phase.

  1. Start with the momentum equation rearranged for \(v_i\): \(v_i = \frac{m + M}{m} \cdot V\)
  2. Substitute \(V = \sqrt{2gh}\) into the equation: \(v_i = \frac{m + M}{m} \sqrt{2gh}\)

Through this combined analysis, experimental physicists do not need high-speed cameras or sensors to measure a bullet's speed. By applying momentum conservation to the collision and energy conservation to the resulting motion, the initial velocity is determined simply by weighing the objects and measuring how high the pendulum swings.