The Hodgkin-Huxley Model of Squid Neuron Action Potentials

In 1952, British physiologists Alan Hodgkin and Andrew Huxley revolutionized neuroscience by mathematically modeling how electrical signals, known as action potentials, travel along the giant axons of squid. By treating the neuron's cell membrane as an electrical circuit and applying a system of four nonlinear ordinary differential equations, they successfully described how the flow of sodium and potassium ions generates and propagates nerve impulses. This article explains the experimental setup, the electrical circuit analogy, the gating variables, and the differential mathematics Hodgkin and Huxley used to achieve this Nobel Prize-winning breakthrough.

The Squid Giant Axon and the Voltage Clamp

To build a mathematical model, Hodgkin and Huxley first needed empirical data. Most neurons are microscopic, making it nearly impossible to insert electrodes into them using 1940s technology. They solved this by using the giant axon of the longfin inshore squid (Loligo pealeii), which can reach up to a millimeter in diameter.

Using an apparatus called the "voltage clamp," they inserted two wires into the axon. One wire measured the voltage across the cell membrane, while the other injected electrical current to hold that voltage at a constant, researcher-defined level. Because the voltage could not change, any current the machine had to inject to keep the voltage steady was directly equal to the ionic current flowing across the neuron's membrane. By swapping out the ions in the fluid surrounding the neuron, they isolated the exact currents of sodium (\(Na^+\)) and potassium (\(K^+\)) at various voltages.

The Membrane as an Electrical Circuit

Hodgkin and Huxley translated the biological components of the squid's cell membrane into a standard parallel electrical circuit.

  • Capacitor (\(C_m\)): The lipid bilayer of the cell membrane separates charged ions inside the cell from those outside, acting as an electrical capacitor.
  • Batteries (\(E_{Na}, E_K, E_L\)): The concentration differences of ions inside and outside the cell create electrochemical gradients. These act as batteries driving specific ions in or out.
  • Resistors/Conductances (\(g_{Na}, g_K, g_L\)): The ion channels that allow ions to cross the membrane act as resistors. Hodgkin and Huxley measured these in terms of conductance (the inverse of resistance). Sodium and potassium conductances are variable because their channels open and close depending on the voltage, while the "leak" conductance (\(g_L\), mostly chloride ions) remains constant.

Using Kirchhoff’s current law, they stated that the total current (\(I\)) flowing across the membrane is the sum of the capacitive current and the ionic currents. This yielded their first foundational differential equation:

\[I = C_m \frac{dV}{dt} + I_{Na} + I_K + I_L\]

Here, \(\frac{dV}{dt}\) is the rate of change of the membrane voltage over time. Applying Ohm's law (\(I = gV\)), they rewrote the individual ionic currents based on their conductances and the difference between the membrane voltage (\(V\)) and the battery voltage (\(E\)) of each ion:

\[I = C_m \frac{dV}{dt} + g_{Na}(V - E_{Na}) + g_K(V - E_K) + g_L(V - E_L)\]

Gating Variables and First-Order Differential Equations

The equation above could not yet predict an action potential because \(g_{Na}\) and \(g_K\) change over time as voltage changes. To model this, Hodgkin and Huxley proposed that ion channels have microscopic "gates" that open and close based on voltage. They introduced three dimensionless variables—\(n\), \(m\), and \(h\)—representing the probability (from 0 to 1) that a specific gate is open.

By fitting curves to their voltage clamp data, they determined the following:

  • Potassium activation (\(n\)): A potassium channel requires four identical gates to be open simultaneously to allow ions through. Therefore, potassium conductance is proportional to \(n^4\).
  • Sodium activation (\(m\)) and inactivation (\(h\)): A sodium channel requires three fast-opening activation gates (\(m^3\)) and one slow-closing inactivation gate (\(h\)) to be open simultaneously. Therefore, sodium conductance is proportional to \(m^3h\).

They replaced the variable conductances in their main equation with the maximum possible conductances (\(\bar{g}_{Na}\) and \(\bar{g}_K\)) multiplied by these probabilities:

\[I = C_m \frac{dV}{dt} + \bar{g}_{Na}m^3h(V - E_{Na}) + \bar{g}_Kn^4(V - E_K) + \bar{g}_L(V - E_L)\]

To calculate how \(n\), \(m\), and \(h\) change over time as voltage fluctuates, they wrote three additional first-order ordinary differential equations:

\[\frac{dn}{dt} = \alpha_n(V)(1 - n) - \beta_n(V)n\]

\[\frac{dm}{dt} = \alpha_m(V)(1 - m) - \beta_m(V)m\]

\[\frac{dh}{dt} = \alpha_h(V)(1 - h) - \beta_h(V)h\]

In these equations, \(\alpha\) (alpha) represents the rate at which closed gates open, and \(\beta\) (beta) represents the rate at which open gates close. Both \(\alpha\) and \(\beta\) are nonlinear functions of voltage that Hodgkin and Huxley derived empirically from their squid data. Subtracting the closing rate from the opening rate gives the net rate of change for each gating variable.

Modeling Spatial Propagation

The four equations above model an action potential at a single, stationary point on the neuron. To model how the action potential physically propagates down the length of the axon, Hodgkin and Huxley combined their circuit model with 19th-century cable theory, which describes how electricity decays as it travels down an insulated wire.

When an action potential fires at one point on the axon, local currents flow down the inside of the axon to adjacent sections. Based on cable theory, the total membrane current (\(I\)) at any point along the axon (defined as spatial coordinate \(x\)) is proportional to the second spatial derivative of the voltage:

\[I = \frac{a}{2R_i} \frac{\partial^2 V}{\partial x^2}\]

In this equation, \(a\) is the radius of the axon and \(R_i\) is the electrical resistance of the fluid inside the cell. By substituting this spatial current into their main membrane equation, they created a partial differential equation (PDE) that accounted for both time (\(t\)) and space (\(x\)):

\[\frac{a}{2R_i} \frac{\partial^2 V}{\partial x^2} = C_m \frac{\partial V}{\partial t} + \bar{g}_{Na}m^3h(V - E_{Na}) + \bar{g}_Kn^4(V - E_K) + \bar{g}_L(V - E_L)\]

Solving a nonlinear PDE was nearly impossible in 1952 without advanced digital computers. To simplify the math, Hodgkin and Huxley used the known biological fact that an action potential travels down an axon at a constant velocity (\(\theta\)) without changing its shape. This allowed them to use the wave equation identity:

\[\frac{\partial^2 V}{\partial x^2} = \frac{1}{\theta^2} \frac{d^2V}{dt^2}\]

By substituting this back into the PDE, they eliminated the spatial variable \(x\) entirely, converting the equation back into an ordinary differential equation:

\[\frac{a}{2R_i\theta^2} \frac{d^2V}{dt^2} = C_m \frac{dV}{dt} + \bar{g}_{Na}m^3h(V - E_{Na}) + \bar{g}_Kn^4(V - E_K) + \bar{g}_L(V - E_L)\]

Using a hand-cranked Brunsviga mechanical calculator, Andrew Huxley spent weeks numerically integrating this system of equations. By guessing the propagation velocity (\(\theta\)) and adjusting it until the voltage remained bounded instead of shooting off to infinity, they calculated a theoretical propagation speed of 18.8 meters per second. When they measured the actual speed in a real squid axon, it was 21.2 meters per second—a triumphant validation that their differential mathematics accurately captured the physical reality of the nervous system.