Why Does MS Demyelination Slow Action Potentials?

Demyelination in multiple sclerosis severely disrupts the rapid propagation of electrical impulses along central nervous system axons. In healthy myelinated nerve fibers, action potentials propagate via saltatory conduction, where depolarization jumps between unmyelinated nodes of Ranvier. When autoimmune mechanisms strip the insulating myelin sheath synthesized by oligodendrocytes, the biophysical cable properties of the axon deteriorate, exposing low-density ion channel regions that disperse electrical current. Consequently, conduction velocity slows drastically, temporal dispersion develops, and complete conduction block can occur, producing the characteristic clinical deficits observed in neurobiology and neurology.

Structural Basis of Saltatory Conduction

In the vertebrate central nervous system, oligodendrocytes form concentric layers of compacted plasma membrane around neuronal axons. This myelin sheath functions as an electrical insulator and segregates the axonal membrane into distinct functional domains:

  1. Nodes of Ranvier: Short, uninsulated gaps enriched with high densities of voltage-gated sodium channels (\(Na_v1.6\)), where regenerative inward sodium currents generate the action potential.
  2. Paranodes: Specialized junctions flanking the nodes, formed by axoglial contact complexes (including contactin, contactin-associated protein, and neurofascin-155), which anchor the myelin loops and create a high-resistance barrier.
  3. Juxtaparanodes: Regions adjacent to the paranodes enriched with low-threshold voltage-gated potassium channels (\(K_v1.1\), \(K_v1.2\)), which suppress aberrant repetitive firing and stabilize axonal excitability.
  4. Internodes: Long, heavily insulated axonal segments beneath the myelin sheath where the membrane contains minimal ion channels.

This spatial distribution restricts regenerative depolarization exclusively to the nodes of Ranvier. Rather than propagating continuously along the entire axonal length, current spreads rapidly and passively along the internode to depolarize the subsequent node above threshold, a process known as saltatory conduction.

Biophysical Cable Properties and Conduction Velocity

The speed of electrotonic signal transmission through an axon is governed by linear cable theory, summarized by two fundamental parameters: the length constant (\(\lambda\)) and the time constant (\(\tau\)).

1. The Length Constant (\(\lambda\))

The length constant reflects the distance along an axon over which a passive voltage change attenuates to approximately 37% (\(1/e\)) of its initial value:

\[\lambda = \sqrt{\frac{r_m}{r_i + r_o}} \approx \sqrt{\frac{r_m}{r_i}}\]

where:

  • \(r_m\) is the membrane resistance per unit length.
  • \(r_i\) is the intracellular axial (longitudinal) resistance per unit length.
  • \(r_o\) is the extracellular resistance per unit length (typically negligible).

In intact myelinated fibers, multiple lamellae of myelin dramatically increase effective membrane resistance (\(r_m\)) by eliminating open conductive pathways through the lipid bilayer. A large \(r_m\) results in a high length constant (\(\lambda\)), allowing local depolarizing currents to travel considerable distances down the axon without significant attenuation before recharging the next nodal membrane.

When demyelination occurs:

  • The protective high-resistance layer is lost, causing \(r_m\) to plummet.
  • The length constant \(\lambda\) contracts substantially.
  • Current escapes across the bare axolemma into the extracellular space, rapidly dissipating the passive longitudinal voltage before it reaches the next cluster of sodium channels.

2. The Membrane Capacitance and Time Constant (\(\tau\))

Membrane capacitance (\(C_m\)) determines the amount of electrical charge that must be accumulated across the membrane to produce a unit change in transmembrane voltage:

\[C_m = \frac{\epsilon \cdot A}{d}\]

where \(\epsilon\) is the dielectric permittivity of the membrane material, \(A\) is membrane surface area, and \(d\) is the thickness of the dielectric barrier.

Because the myelin sheath adds dozens of lipid bilayers in series, the effective thickness \(d\) of the insulating layer increases, which reduces total membrane capacitance (\(C_m\)) inversely:

\[\frac{1}{C_{\text{total}}} = \sum_{k=1}^{n} \frac{1}{C_k}\]

The membrane time constant (\(\tau\)), representing the time required for a membrane potential change to reach approximately 63% (\(1 - 1/e\)) of its steady-state amplitude, is defined as:

\[\tau = r_m \cdot c_m\]

Low capacitance means less charge is absorbed by the membrane dielectric to shift the transmembrane potential, permitting rapid charging of the adjacent node. Upon demyelination, the loss of multilayer insulation drastically increases local axonal capacitance. A higher capacitance requires significantly more time and inward ionic current to alter the transmembrane voltage, decelerating conduction velocity.

Channel Mismatch and Conduction Failure

Beyond passive electrical decay, demyelination creates a functional ion channel mismatch:

  • Internodal Channel Paucity: Normal internodal axolemma possesses a very low density of sodium channels (fewer than 20–50 channels per \(\mu m^2\), compared to over 1,000–2,000 channels per \(\mu m^2\) at the node of Ranvier). When stripped of myelin, the internode lacks adequate inward sodium conductance to regenerate an active impulse.
  • Exposure of Juxtaparanodal Potassium Channels: Myelin retraction exposes internodal and juxtaparanodal voltage-gated potassium channels (\(K_v1\)). The outward potassium currents through these exposed channels hyperpolarize the axon, shunting depolarizing currents and preventing the generation or spread of subsequent action potentials.
  • Safety Factor Reduction: The safety factor of nerve conduction is the ratio of current available to stimulate the next segment divided by the minimum current required to reach firing threshold. Demyelination lowers this ratio from normal values (>5) to below 1, causing partial slowing, temporal dispersion among axon bundles, frequency-dependent conduction block during rapid stimulation, or complete conduction arrest.

Clinical Neurobiology and Pathophysiological Correlates

The slowing and failure of action potential transmission directly account for MS symptoms:

  • Negative Symptoms: Conduction blocks along optic, pyramidal, or sensory pathways produce acute deficits such as visual loss (optic neuritis), paresis, and sensory loss.
  • Uhthoff's Phenomenon: Mild elevations in core body temperature (e.g., from exercise, fever, or warm baths) further diminish conduction velocity and precipitate conduction blocks in demyelinated axons. Elevated temperature accelerates the inactivation kinetics of sodium channels and shortens action potential duration, reducing total inward charge transfer below the already precarious threshold needed for transmission.
  • Axonal Remodeling and Chronic Energy Depletion: Denuded axons attempt compensatory redistribution of sodium channels, such as upregulating \(Na_v1.2\) or diffuse \(Na_v1.6\). While this can partially restore continuous, slow conduction, it increases sodium influx, forcing the \(Na^+/K^+\)-ATPase pump into overdrive. In the face of impaired mitochondrial trafficking and reduced oligodendrocytic trophic support (lactate and pyruvate shuttling), axons undergo severe metabolic stress, intra-axonal calcium accumulation, and irreversible secondary axonal degeneration.